Model Number
WD-F-1000
Minimum Operating Temperature
0.6°C/33°F
Maximum Operating Temperature
38°C/100°F
DMinimum Working Pressure
140 kPa/20 psi
Maximum Working Pressure
689 kPa/100 psi
How do I replace the Waterdrop F-1000 water filter?
1. Slowly turn the cartridge counterclockwise until it comes to a complete
stop (approx. 90° or a 1/4 turn). In this position, the inlet and outlet ports are closed and the
filter's internal pressure is relieved.
2. Approximately 2oz of water need to be discharged from the vent line.
Pull the used cartridge straight out and discard it in the trash.
3. Insert the new cartridge into the filter head. Make sure the top
surface of the cartridge sits flush with the bottom of the filter head.
4. Turn the cartridge clockwise until it comes to a complete stop (approx.
90° or 1/4 turn).
Do I need to flush the filter before using it?
Yes, it is highly recommended to flush the Waterdrop replacement filter
cartridges for the F-1000 water filter before using. The filter is made from coconut carbon block, so
you may find some carbon particles in the filter. Therefore, you should flush at first to remove these
carbon small particles, leaving you with only pure water.
Can the Waterdrop F-1000 water filter be connected to my hot water line?
The operating temperature of the filter is 33-100℉. Please note that any
temperature below or above this range is not recommended.
If I do not change my filter every six months, can this damage the system?
You should replace the Waterdrop under counter water filter replacement
filter cartridge every six months – or sooner if water flow is reduced or if there is heavy sediment
present in water. Filters used beyond this timeline will fatigue, thereby degrading the filtration
performance.
What is the flow rate of this undersink water filter?
A fast and stable water flow rate of 0.75gpm is another advantage of this
water filter.
How often should I replace this Waterdrop undersink water filter?
The Waterdrop replacement filter cartridges can last up to six months
which is equal to 625 gallons of filtered water, whichever comes first based on usage. This helps cut
down on your expensive bottled water consumption and protects the environment.
Does the installation of this undersink water filter require any tools or installation kits?
The WD-F-1000 under counter water filtration system replacement filter
cartridge is designed to fit the indicated brands. It is easy to install and operate without any tools
or other installation kits.
What contaminants can this undersink water filter help reduce?
Thanks to its superior coconut shell carbon block, this Waterdrop F-1000
water filter can effectively reduce most chlorine, heavy metals, sediment, rust, bad taste and odor,
lead, mercury, asbestos, benzene, and atrazine. The high contaminant removal rate ensures that your
water is clean and healthy.
What systems are compatible with the Waterdrop F-1000 replacement water filter?
It is compatible with the following filtration systems: F-2000, F-2000s,
F-1000, F-1000s. Waterdrop is an independent brand.
What are the pros of the Waterdrop F-1000 replacement water filter?
Waterdrop uses coconut shell from Sri Lanka for the carbon filter block
and food-grade plastic housing to free you from worrying about contaminants leaking back into your
filtered water. You no longer need to worry about water leakage, as this water filter fits the
F-1000/2000 series perfectly.
What are the common undersink water filter types and how do they work?
Conventional under sink filter
The feed water is sourced from the undersink cold water pipe. It passes
through a flexible plastic tube and gets to the water filter. After filtration, it is transported from
the filter to the dedicated filter faucet through another flexible plastic tube. The user gets the
filtered water from this dedicated faucet right on the top of the sink. The filtration process starts
when the user opens the tap, hence the system requires constant pressure to send the water from the cold
water pipe to the filter and finally out of the faucet.
Simple under sink water filter
The source water leaves the cold water supply to the filter for filtration
and finally dispensed through the regular water sink faucet. The hot water does not undergo filtration.
The more common version is one without a distinct ledge as the flexible undersink pipes are easier to
use. Unlike the hard copper undersink pipes, the flexible pipes facilitate a simple and cost-effective
DIY installation.
Most under counter water filters can deliver excellent filtration
performance because they adopt activated carbon filtration, present as advanced carbon block filters.
For the under counter water filtration system replacement filter cartridge from Waterdrop, the
filtration is handled by the premium carbon materials sourced from the Sri Lanka coconut shell. This
ensures the filters operate with a superior reduction performance.
Efficient filtration
Our replacement filter cartridges for InSinkErator F-1000 water
filters can reduce chlorine and various other harmful substances in water.
Superior materials
Adopting natural coconut shell carbon block from Sri Lanka, our
replacement filter cartridge for the undersink water filter can adsorb chlorine and reduce
unpleasant taste.
The filter adopts food-grade plastic housing, preventing
contaminants from leaching back to your water.
Perfect fit for the original system
This replacement filter is designed to fit with your original
system, providing you with a great water experience without worrying about water leakage.
Stable & fast water flow
Waterdrop under counter water filtration system replacement filter
is designed to produce filtered water at a stable and fast water flow. You can now conveniently
fulfill the water needs of your family or workplace.